No inventory found for your selected Alloy
NOTE: If you are looking for a specific thickness not listed above, please Contact Us to inquire about current lead times.
- Withstands temperatures up to 932°C
- Uses: Used for everything from resistors, heating applications, mechanical components, food-handling equipment, magnetically actuated parts, sonar devices, electrical and electronic leads, and springs. Good mechanical properties over a wide range of temperature and excellent resistance to many corrosives, in particular hydroxides. Good resistance to corrosion in acids and alkalis and is most useful under reducing conditions. Outstanding resistance to caustic alkalis up to and including the molten state. In acid, alkaline and neutral salt solutions the material shows good resistance, but in oxidizing salt solutions severe attack will occur. Resistant to all dry gases at room temperature and in dry chlorine and hydrogen chloride may be used in temperatures up to 550ºC. Resistance to mineral acids varies according to temperature and concentration and whether the solution is aerated or not. Corrosion resistance is better in de-aerated acid.
- Common Name: Nickel 201, Nickel Alloy 201, Alloy 201, 201 Alloy, Alloy K270
|Nickel (Ni)||99.0% Min.|
- Specific Resistance: 48 ohms/cmf, 7.98 microohm/cm
- Nom. Temp. Coeff. of Resistance (TCR): 0.006 ohm/ohm/°C (0-100°C)
- Density: 0.322 lb/cu. in.
- Specific Heat (20°C): 0.13 cal/g
- Nominal Coefficient of Linear Expansion: 15 X 10-6 in/in/°C
- Approx. Melting Point: 1450°C
- Tensile Strength at 20°C: 110 KPSI Hard, 50 KPSI Annealed
- Magnetic Attraction: Strong